Anycubic ACE 2 Pro is listed in the Anycubic filament feeder catalog. This page separates documented specifications from scoped compatibility rules, so an unlisted combination stays unverified.
As an Amazon Associate I earn from qualifying purchases.
Before you rely on a result
A documented product or fit statement is only as specific as its source. Match the exact model, installed hotend, revision, and required adapter before acting.
Exact identification
Catalog ID: anycubic-ace-2-pro. Manufacturer: Anycubic. Model or part number: not established.
Manufacturer-recorded specifications
Values below are only fields recorded from the linked manufacturer material. A missing value means the source set did not establish it; it does not imply zero or no limit.
| Specification | Documented value |
|---|---|
| Maximum spool count | 4 |
Model-specific notes
- Recommended plastic 1 kg spool dimensions in the official warm tips are 195–200 mm diameter and 60–68 mm width; these are recommendations, not proven universal maximum dimensions.
- Mixed simultaneous use of ACE Pro and ACE 2 Pro is unsupported.
Documented relationships
Showing 17 of 17 linked rules. The checker can inspect an exact pair and source. A verified rule may still require its listed conditions.
| Related item | Source status | Fit axis | Conditions and exclusions |
|---|---|---|---|
| Anycubic Kobra 3 | CONDITIONAL | feeder to printer | Install at least firmware V2.4.6.4.; Use the ACE 2 Pro signal adapter cable specified for this printer; the original ACE Pro cable is not interchangeable.; The official compatibility guide states support, but an older warm-tips page still states temporary non-support. Confirm the current printer firmware and upgrade instructions before a positive verdict. |
| Anycubic Kobra 3 V2 | CONDITIONAL | feeder to printer | Install at least firmware V1.1.2.5.; Use the ACE 2 Pro signal adapter cable specified for this printer; the original ACE Pro cable is not interchangeable.; The official compatibility guide states support, but an older warm-tips page still states temporary non-support. Confirm the current printer firmware and upgrade instructions before a positive verdict. |
| Anycubic Kobra 3 Max | CONDITIONAL | feeder to printer | Install at least firmware V2.5.2.5.; Use the ACE 2 Pro signal adapter cable specified for this printer; the original ACE Pro cable is not interchangeable.; The official compatibility guide states support, but an older warm-tips page still states temporary non-support. Confirm the current printer firmware and upgrade instructions before a positive verdict. |
| Anycubic Kobra S1 | CONDITIONAL | feeder to printer | Install at least firmware V2.7.0.7.; Use the ACE 2 Pro signal adapter cable specified for this printer; the original ACE Pro cable is not interchangeable.; The official compatibility guide states support, but an older warm-tips page still states temporary non-support. Confirm the current printer firmware and upgrade instructions before a positive verdict.; Standalone Kobra S1 additionally requires the multi-color retraction module. |
| Anycubic Kobra S1 Max | CONDITIONAL | feeder to printer | Use the model-specific ACE 2 Pro hardware connection described in the official setup guide. |
| Anycubic Kobra X | CONDITIONAL | feeder to printer | Use the model-specific ACE 2 Pro hardware connection described in the official setup guide. |
| Anycubic Kobra 2 | INCOMPATIBLE | feeder to printer | Check source scope before installing. |
| Anycubic Kobra 2 Pro | INCOMPATIBLE | feeder to printer | Check source scope before installing. |
| Anycubic Kobra 2 Plus | INCOMPATIBLE | feeder to printer | Check source scope before installing. |
| Anycubic Kobra 2 Max | INCOMPATIBLE | feeder to printer | Check source scope before installing. |
| Anycubic Kobra 2 Neo | INCOMPATIBLE | feeder to printer | Check source scope before installing. |
| HIPS | INCOMPATIBLE | material to feeder | Check source scope before installing. |
| TPU | INCOMPATIBLE | material to feeder | For TPU this statement covers TPU 95A specified in the source; it must not be generalized to every future stiff TPU formulation. |
| PLA + carbon fiber | NOT RECOMMENDED | material to feeder | Manufacturer warns against hard/brittle and carbon/glass-fiber-filled filaments in this feeder. |
| Polyamide / nylon (grade unspecified) + carbon fiber | NOT RECOMMENDED | material to feeder | Manufacturer warns against hard/brittle and carbon/glass-fiber-filled filaments in this feeder. |
| Polyamide / nylon (grade unspecified) + glass fiber | NOT RECOMMENDED | material to feeder | Manufacturer warns against hard/brittle and carbon/glass-fiber-filled filaments in this feeder. |
| PETG + carbon fiber | NOT RECOMMENDED | material to feeder | Manufacturer warns against hard/brittle and carbon/glass-fiber-filled filaments in this feeder. |
Manufacturer sources
Links document the stated identity, specifications, or scoped relations. They do not represent hands-on testing by this site.
- anycubic — Anycubic ACE 2 Pro: Intelligent Filament Drying & Storage checked 2026-10-30; global
- anycubic — ACE 2 Pro - Multi-Model Compatibility Guide | Anycubic Wiki checked 2026-10-30; global
- anycubic — ACE 2 Pro - Warm Tips | Anycubic Wiki checked 2026-10-30; global
Search purchase options
This opens Amazon search results, not a verified product listing. Match the exact part number, diameter, installed hardware, and manufacturer instructions before ordering.
(paid link)
Search Filament Feeders on Amazon