Polyamide / nylon (grade unspecified) + glass fiber is listed in the filament material catalog. This page separates documented specifications from scoped compatibility rules, so an unlisted combination stays unverified.
Before you rely on a result
A documented product or fit statement is only as specific as its source. Match the exact model, installed hotend, revision, and required adapter before acting.
Exact identification
Catalog ID: pa-gf. Manufacturer: not applicable.
Manufacturer-recorded specifications
Values below are only fields recorded from the linked manufacturer material. A missing value means the source set did not establish it; it does not imply zero or no limit.
| Specification | Documented value |
|---|---|
| Base material | pa |
Model-specific notes
- Use the exact product formulation and its manufacturer settings. Membership in this category is not approval for a printer, nozzle or feeder.
Documented relationships
Showing 7 of 7 linked rules. The checker can inspect an exact pair and source. A verified rule may still require its listed conditions.
| Related item | Source status | Fit axis | Conditions and exclusions |
|---|---|---|---|
| Bambu Lab P1S | CONDITIONAL | material to printer | Upgrade to a hardened steel hotend/nozzle and hardened extruder gears before abrasive fiber-filled filament. Material-specific enclosure, temperature and profile requirements remain.; Requires: Bambu Hardened Steel Extruder Gear Assembly |
| Anycubic ACE 2 Pro | NOT RECOMMENDED | material to feeder | Manufacturer warns against hard/brittle and carbon/glass-fiber-filled filaments in this feeder. |
| UltiMaker Print Core AA 0.25 mm | NOT RECOMMENDED | material to nozzle | AA/AA+ are intended for non-abrasive build materials. |
| UltiMaker Print Core AA 0.4 mm | NOT RECOMMENDED | material to nozzle | AA/AA+ are intended for non-abrasive build materials. |
| UltiMaker Print Core AA 0.8 mm | NOT RECOMMENDED | material to nozzle | AA/AA+ are intended for non-abrasive build materials. |
| UltiMaker Print Core AA+ 0.4 mm | NOT RECOMMENDED | material to nozzle | AA/AA+ are intended for non-abrasive build materials. |
| Snapmaker x Phaetus Liber High Flow Hotend for U1 0.4 mm | NOT RECOMMENDED | material to nozzle | Applies to high-flow printing mode; the manufacturer recommends a suitable standard hotend for CF/GF/wood-filled filaments and TPU. |
Manufacturer sources
Links document the stated identity, specifications, or scoped relations. They do not represent hands-on testing by this site.
- Bambu Lab — Bambu Lab EU public product catalog, page 3 checked 2026-10-30; EU
- Bambu Lab — Bambu Lab US public product catalog, page 1 checked 2026-10-30; US
- anycubic — ACE 2 Pro - Warm Tips | Anycubic Wiki checked 2026-10-30; global
- snapmaker — Snapmaker x Phaetus Liber™ High Flow Hotend for U1 | Snapmaker Wiki checked 2026-10-30; global
- ultimaker — Login checked 2026-10-30; global