FIN / Slice Mako is listed in the Slice Engineering hotend interface catalog. This page separates documented specifications from scoped compatibility rules, so an unlisted combination stays unverified.
Before you rely on a result
A documented product or fit statement is only as specific as its source. Match the exact model, installed hotend, revision, and required adapter before acting.
Exact identification
Catalog ID: slice-fin. Manufacturer: Slice Engineering.
Manufacturer-recorded specifications
Values below are only fields recorded from the linked manufacturer material. A missing value means the source set did not establish it; it does not imply zero or no limit.
| Specification | Documented value |
|---|---|
| Interface | FIN insulated nozzle geometry; official GammaMaster catalog explicitly limits FIN variants to Mako hotends. |
Documented relationships
Showing 11 of 11 linked rules. The checker can inspect an exact pair and source. A verified rule may still require its listed conditions.
| Related item | Source status | Fit axis | Conditions and exclusions |
|---|---|---|---|
| Microswiss CM2™ FIN Nozzle - for Mako Hotend — .4mm | CONDITIONAL | nozzle to hotend | Confirm the original stock hotend and toolhead/cable revision; this rule does not cover a FlowTech or other aftermarket conversion. |
| Microswiss CM2™ FIN Nozzle - for Mako Hotend — .6mm | CONDITIONAL | nozzle to hotend | Confirm the original stock hotend and toolhead/cable revision; this rule does not cover a FlowTech or other aftermarket conversion. |
| Microswiss CM2™ FIN Nozzle - for Mako Hotend — .8mm | CONDITIONAL | nozzle to hotend | Confirm the original stock hotend and toolhead/cable revision; this rule does not cover a FlowTech or other aftermarket conversion. |
| GammaMaster® Nozzle — FIN / 0.2 mm | CONDITIONAL | nozzle to hotend | Select the exact geometry; FIN is limited to Mako hotends, and AP3X/Vase need application-specific clearance and setup. |
| GammaMaster® Nozzle — FIN / 0.4 mm | CONDITIONAL | nozzle to hotend | Select the exact geometry; FIN is limited to Mako hotends, and AP3X/Vase need application-specific clearance and setup. |
| GammaMaster® Nozzle — FIN / 0.6 mm | CONDITIONAL | nozzle to hotend | Select the exact geometry; FIN is limited to Mako hotends, and AP3X/Vase need application-specific clearance and setup. |
| GammaMaster® Nozzle — FIN / 0.8 mm | CONDITIONAL | nozzle to hotend | Select the exact geometry; FIN is limited to Mako hotends, and AP3X/Vase need application-specific clearance and setup. |
| Bondtech Coated Copper CHT FIN — 0.2 mm | VERIFIED | nozzle to hotend | Check source scope before installing. |
| Bondtech Coated Copper CHT FIN — 0.4 mm | VERIFIED | nozzle to hotend | Check source scope before installing. |
| Bondtech Coated Copper CHT FIN — 0.6 mm | VERIFIED | nozzle to hotend | Check source scope before installing. |
| Bondtech Coated Copper CHT FIN — 0.8 mm | VERIFIED | nozzle to hotend | Check source scope before installing. |
Manufacturer sources
Links document the stated identity, specifications, or scoped relations. They do not represent hands-on testing by this site.
- Slice Engineering — GammaMaster® Nozzle checked 2026-10-30; US
- Microswiss — Microswiss CM2™ FIN Nozzle - for Mako Hotend checked 2026-10-30; US
- Bondtech — Bondtech CHT FIN Nozzles for the Mako hotend on Bambu Lab 3D printers checked 2026-10-30; global