MK8 nozzle interface is listed in the E3D hotend interface catalog. This page separates documented specifications from scoped compatibility rules, so an unlisted combination stays unverified.
Advertisement
Before you rely on a result
A documented product or fit statement is only as specific as its source. Match the exact model, installed hotend, revision, and required adapter before acting.
Exact identification
Catalog ID: e3d-mk8. Manufacturer: E3D.
Manufacturer-recorded specifications
Values below are only fields recorded from the linked manufacturer material. A missing value means the source set did not establish it; it does not imply zero or no limit.
| Specification | Documented value |
|---|---|
| Interface | Manufacturer-labeled MK8 nozzle interface; exact printer fit requires explicit model evidence. |
| Filament diameter | 1.75 mm |
Advertisement
Documented relationships
Showing 28 of 40 linked rules. The checker can inspect an exact pair and source. A verified rule may still require its listed conditions.
| Related item | Source status | Fit axis | Conditions and exclusions |
|---|---|---|---|
| E3D Brass MK8 Nozzles for Creality Ender & CR10 Printers — Brass / 1.75mm / 0.25mm | VERIFIED | nozzle to hotend | Check source scope before installing. |
| E3D Brass MK8 Nozzles for Creality Ender & CR10 Printers — Brass / 1.75mm / 0.40mm | VERIFIED | nozzle to hotend | Check source scope before installing. |
| E3D Brass MK8 Nozzles for Creality Ender & CR10 Printers — Brass / 1.75mm / 0.60mm | VERIFIED | nozzle to hotend | Check source scope before installing. |
| E3D Brass MK8 Nozzles for Creality Ender & CR10 Printers — Brass / 1.75mm / 0.80mm | VERIFIED | nozzle to hotend | Check source scope before installing. |
| DiamondBack MK8 Nozzles — 0.25mm | VERIFIED | nozzle to hotend | Check source scope before installing. |
| DiamondBack MK8 Nozzles — 0.40mm | VERIFIED | nozzle to hotend | Check source scope before installing. |
| DiamondBack MK8 Nozzles — 0.60mm | VERIFIED | nozzle to hotend | Check source scope before installing. |
| DiamondBack MK8 Nozzles — 0.80mm | VERIFIED | nozzle to hotend | Check source scope before installing. |
| DiamondBack MK8 Nozzles — 1.00mm | VERIFIED | nozzle to hotend | Check source scope before installing. |
| Microswiss CM2™ - MK8 Nozzle Hardened Tip — .4mm | CONDITIONAL | nozzle to hotend | Match the hotend and filament-path diameter to this exact nozzle variant. |
| Microswiss CM2™ - MK8 Nozzle Hardened Tip — .6mm | CONDITIONAL | nozzle to hotend | Match the hotend and filament-path diameter to this exact nozzle variant. |
| Microswiss CM2™ - MK8 Nozzle Hardened Tip — .8mm | CONDITIONAL | nozzle to hotend | Match the hotend and filament-path diameter to this exact nozzle variant. |
| Microswiss CM2™ - MK8 Nozzle Hardened Tip — 1.0mm | CONDITIONAL | nozzle to hotend | Match the hotend and filament-path diameter to this exact nozzle variant. |
| MK8 Brass Plated Nozzle — .2mm | CONDITIONAL | nozzle to hotend | Match the hotend and filament-path diameter to this exact nozzle variant. |
| MK8 Brass Plated Nozzle — .3mm | CONDITIONAL | nozzle to hotend | Match the hotend and filament-path diameter to this exact nozzle variant. |
| MK8 Brass Plated Nozzle — .4mm | CONDITIONAL | nozzle to hotend | Match the hotend and filament-path diameter to this exact nozzle variant. |
| MK8 Brass Plated Nozzle — .6mm | CONDITIONAL | nozzle to hotend | Match the hotend and filament-path diameter to this exact nozzle variant. |
| MK8 Brass Plated Nozzle — .8mm | CONDITIONAL | nozzle to hotend | Match the hotend and filament-path diameter to this exact nozzle variant. |
| MK8 Brass Plated Nozzle — 1.0mm | CONDITIONAL | nozzle to hotend | Match the hotend and filament-path diameter to this exact nozzle variant. |
| MK8 - M2 Hardened High Speed Steel Nozzle WS2 coated — .4mm | CONDITIONAL | nozzle to hotend | Match the hotend and filament-path diameter to this exact nozzle variant. |
| MK8 - M2 Hardened High Speed Steel Nozzle WS2 coated — .6mm | CONDITIONAL | nozzle to hotend | Match the hotend and filament-path diameter to this exact nozzle variant. |
| MK8 - M2 Hardened High Speed Steel Nozzle WS2 coated — .8mm | CONDITIONAL | nozzle to hotend | Match the hotend and filament-path diameter to this exact nozzle variant. |
| MK8 - M2 Hardened High Speed Steel Nozzle WS2 coated — 1.0mm | CONDITIONAL | nozzle to hotend | Match the hotend and filament-path diameter to this exact nozzle variant. |
| EndCoat™ Nozzle — PMK8(MK8) / 0.4mm / 1.75 | VERIFIED | nozzle to hotend | Check source scope before installing. |
| EndCoat™ Nozzle — PMK8(MK8) / 0.5mm / 1.75 | VERIFIED | nozzle to hotend | Check source scope before installing. |
| EndCoat™ Nozzle — PMK8(MK8) / 0.6mm / 1.75 | VERIFIED | nozzle to hotend | Check source scope before installing. |
| EndCoat™ Nozzle — PMK8(MK8) / 0.8mm / 1.75 | VERIFIED | nozzle to hotend | Check source scope before installing. |
| Silicon Carbide Nozzle — PMK8（MK8） / 0.40mm / 1.75mm | VERIFIED | nozzle to hotend | Check source scope before installing. |
Advertisement
Manufacturer sources
Links document the stated identity, specifications, or scoped relations. They do not represent hands-on testing by this site.
- E3D — E3D Brass MK8 Nozzles for Creality Ender & CR10 Printers checked 2026-10-30; global
- E3D — DiamondBack MK8 Nozzles checked 2026-10-30; global
- Microswiss — Microswiss CM2™ - MK8 Nozzle Hardened Tip checked 2026-10-30; US
- Microswiss — MK8 Brass Plated Nozzle checked 2026-10-30; US
- Microswiss — MK8 - M2 Hardened High Speed Steel Nozzle WS2 coated checked 2026-10-30; US
- Phaetus — EndCoat™ Nozzle checked 2026-10-30; global
- Phaetus — Silicon Carbide Nozzle checked 2026-10-30; global
Advertisement