High Flow ObXidian® Creality K2 Plus Nozzles is listed in the E3D hotend interface catalog. This page separates documented specifications from scoped compatibility rules, so an unlisted combination stays unverified.
Before you rely on a result
A documented product or fit statement is only as specific as its source. Match the exact model, installed hotend, revision, and required adapter before acting.
Exact identification
Catalog ID: e3d-creality-k2-interface. Manufacturer: E3D.
Manufacturer-recorded specifications
Values below are only fields recorded from the linked manufacturer material. A missing value means the source set did not establish it; it does not imply zero or no limit.
| Specification | Documented value |
|---|---|
| Interface | Dedicated manufacturer-labeled interface. Do not substitute another nozzle based on thread alone. |
Documented relationships
Showing 10 of 10 linked rules. The checker can inspect an exact pair and source. A verified rule may still require its listed conditions.
| Related item | Source status | Fit axis | Conditions and exclusions |
|---|---|---|---|
| High Flow ObXidian® Creality K2 Plus Nozzles — 0.4mm | VERIFIED | nozzle to hotend | Check source scope before installing. |
| High Flow ObXidian® Creality K2 Plus Nozzles — 0.6mm | VERIFIED | nozzle to hotend | Check source scope before installing. |
| High Flow ObXidian® Creality K2 Plus Nozzles — 0.8mm | VERIFIED | nozzle to hotend | Check source scope before installing. |
| DiamondBack Creality K2 Plus Nozzles — 0.4mm | VERIFIED | nozzle to hotend | Check source scope before installing. |
| DiamondBack Creality K2 Plus Nozzles — 0.6mm | VERIFIED | nozzle to hotend | Check source scope before installing. |
| DiamondBack Creality K2 Plus Nozzles — 0.8mm | VERIFIED | nozzle to hotend | Check source scope before installing. |
| Phaetus EndCoat™ Hardened Steel Nozzle for Creality K2 Series — 0.4mm | VERIFIED | nozzle to hotend | Check source scope before installing. |
| Phaetus EndCoat™ Hardened Steel Nozzle for Creality K2 Series — 0.6mm | VERIFIED | nozzle to hotend | Check source scope before installing. |
| Phaetus Silicon Carbide High-Flow Nozzle for Creality K2 Plus / Hi Combo — 0.4mm | VERIFIED | nozzle to hotend | Check source scope before installing. |
| Phaetus Silicon Carbide High-Flow Nozzle for Creality K2 Plus / Hi Combo — 0.6mm | VERIFIED | nozzle to hotend | Check source scope before installing. |
Manufacturer sources
Links document the stated identity, specifications, or scoped relations. They do not represent hands-on testing by this site.
- E3D — High Flow ObXidian® Creality K2 Plus Nozzles checked 2026-10-30; global
- E3D — DiamondBack Creality K2 Plus Nozzles checked 2026-10-30; global
- Phaetus — Phaetus EndCoat™ Hardened Steel Nozzle for Creality K2 Series checked 2026-10-30; global
- Phaetus — Phaetus Silicon Carbide High-Flow Nozzle for Creality K2 Plus / Hi Combo checked 2026-10-30; global