AnkerMake M5/M5C Nozzles is listed in the E3D hotend interface catalog. This page separates documented specifications from scoped compatibility rules, so an unlisted combination stays unverified.
Before you rely on a result
A documented product or fit statement is only as specific as its source. Match the exact model, installed hotend, revision, and required adapter before acting.
Exact identification
Catalog ID: e3d-ankermake-interface. Manufacturer: E3D.
Manufacturer-recorded specifications
Values below are only fields recorded from the linked manufacturer material. A missing value means the source set did not establish it; it does not imply zero or no limit.
| Specification | Documented value |
|---|---|
| Interface | Dedicated manufacturer-labeled interface. Do not substitute another nozzle based on thread alone. |
Documented relationships
Showing 5 of 5 linked rules. The checker can inspect an exact pair and source. A verified rule may still require its listed conditions.
| Related item | Source status | Fit axis | Conditions and exclusions |
|---|---|---|---|
| DiamondBack AnkerMake M5/M5C Nozzles — 0.25mm | VERIFIED | nozzle to hotend | Check source scope before installing. |
| DiamondBack AnkerMake M5/M5C Nozzles — 0.40mm | VERIFIED | nozzle to hotend | Check source scope before installing. |
| DiamondBack AnkerMake M5/M5C Nozzles — 0.60mm | VERIFIED | nozzle to hotend | Check source scope before installing. |
| DiamondBack AnkerMake M5/M5C Nozzles — 0.80mm | VERIFIED | nozzle to hotend | Check source scope before installing. |
| DiamondBack AnkerMake M5/M5C Nozzles — 1.00mm | VERIFIED | nozzle to hotend | Check source scope before installing. |
Manufacturer sources
Links document the stated identity, specifications, or scoped relations. They do not represent hands-on testing by this site.
- E3D — DiamondBack AnkerMake M5/M5C Nozzles checked 2026-10-30; global