UltiMaker Print Core CC 0.6 mm is listed in the UltiMaker nozzle catalog. This page separates documented specifications from scoped compatibility rules, so an unlisted combination stays unverified.
As an Amazon Associate I earn from qualifying purchases.
Before you rely on a result
A documented product or fit statement is only as specific as its source. Match the exact model, installed hotend, revision, and required adapter before acting.
Exact identification
Catalog ID: ultimaker-print-core-cc-0-6. Manufacturer: UltiMaker. Model or part number: not established.
Manufacturer-recorded specifications
Values below are only fields recorded from the linked manufacturer material. A missing value means the source set did not establish it; it does not imply zero or no limit.
| Specification | Documented value |
|---|---|
| Orifice diameter | 0.6 mm |
| Filament diameter | 2.85 mm |
| Interface family | ultimaker-print-core |
Model-specific notes
- Complete print-core cartridge, not a bare screw-in nozzle. SKU was not inferred.
Physical fit before material choice
Matching orifice size does not establish thread, sealing surface, heater assembly, length, or sensor fit. The exact installed hotend and any adapter must match the scoped rule below.
Documented relationships
Showing 8 of 8 linked rules. The checker can inspect an exact pair and source. A verified rule may still require its listed conditions.
| Related item | Source status | Fit axis | Conditions and exclusions |
|---|---|---|---|
| UltiMaker 3 | INCOMPATIBLE | nozzle to printer | Check source scope before installing. |
| UltiMaker S3 | VERIFIED | nozzle to printer | Check source scope before installing. |
| UltiMaker S5 | VERIFIED | nozzle to printer | Check source scope before installing. |
| UltiMaker S6 | CONDITIONAL | nozzle to printer | Only experimental Cura profiles are available for this exact combination; use current Cura and the correct material profile. |
| UltiMaker S7 | VERIFIED | nozzle to printer | Check source scope before installing. |
| UltiMaker S8 | CONDITIONAL | nozzle to printer | Only experimental Cura profiles are available for this exact combination; use current Cura and the correct material profile. |
| UltiMaker Factor 4 | VERIFIED | nozzle to printer | Check source scope before installing. |
| UltiMaker Factor 4 Plus | CONDITIONAL | nozzle to printer | Only experimental Cura profiles are available for this exact combination; use current Cura and the correct material profile. |
Manufacturer sources
Links document the stated identity, specifications, or scoped relations. They do not represent hands-on testing by this site.
- ultimaker — Login checked 2026-10-30; global
Search purchase options
This opens Amazon search results, not a verified product listing. Match the exact part number, diameter, installed hardware, and manufacturer instructions before ordering.
(paid link)
Search 3D Printer Nozzles on Amazon