Hot Ends for Snapmaker J1/J1s — Right Hot End - 0.4mm/Hardened Steel/All-metal is listed in the Snapmaker nozzle catalog. This page separates documented specifications from scoped compatibility rules, so an unlisted combination stays unverified.
As an Amazon Associate I earn from qualifying purchases.
Before you rely on a result
A documented product or fit statement is only as specific as its source. Match the exact model, installed hotend, revision, and required adapter before acting.
Exact identification
Catalog ID: snapmaker-22028. Manufacturer: Snapmaker. Model or part number: 22028.
Manufacturer-recorded specifications
Values below are only fields recorded from the linked manufacturer material. A missing value means the source set did not establish it; it does not imply zero or no limit.
| Specification | Documented value |
|---|---|
| Manufacturer SKU | 22028 |
| Orifice diameter | 0.4 mm |
| Nozzle material | hardened steel |
| Interface family | snapmaker-j1-hotend |
Model-specific notes
- This is a complete or integrated hotend product, not a universal screw-in nozzle.
- All-metal J1 revision integrates the heatsink, heatbreak, block and nozzle; these are not individually replaceable. Mixing original/new hotends requires firmware and PID Autotune from the manual.
Physical fit before material choice
Matching orifice size does not establish thread, sealing surface, heater assembly, length, or sensor fit. The exact installed hotend and any adapter must match the scoped rule below.
Documented relationships
Showing 2 of 2 linked rules. The checker can inspect an exact pair and source. A verified rule may still require its listed conditions.
| Related item | Source status | Fit axis | Conditions and exclusions |
|---|---|---|---|
| Snapmaker J1 | CONDITIONAL | nozzle to printer | Match left/right hotend position; dual packs contain the paired units.; For original/new all-metal hotend mixing, update firmware and perform the specified PID Autotune. |
| Snapmaker J1s | CONDITIONAL | nozzle to printer | Match left/right hotend position; dual packs contain the paired units.; For original/new all-metal hotend mixing, update firmware and perform the specified PID Autotune. |
Manufacturer sources
Links document the stated identity, specifications, or scoped relations. They do not represent hands-on testing by this site.
- snapmaker — Hot Ends for Snapmaker J1/J1s - Snapmaker US checked 2026-10-30; US
- snapmaker — FAQ for DUAL 0.4MM/HARDENED STEEL/ALL-METAL for J1/J1s Printer – Snapmaker checked 2026-10-30; global
Search purchase options
This opens Amazon search results, not a verified product listing. Match the exact part number, diameter, installed hardware, and manufacturer instructions before ordering.
(paid link)
Search 3D Printer Nozzles on Amazon