Bondtech CHT M6 Coated Brass — 1.8 mm is listed in the Bondtech nozzle catalog. This page separates documented specifications from scoped compatibility rules, so an unlisted combination stays unverified.
As an Amazon Associate I earn from qualifying purchases.
Before you rely on a result
A documented product or fit statement is only as specific as its source. Match the exact model, installed hotend, revision, and required adapter before acting.
Exact identification
Catalog ID: bondtech-600-c-cht-mos-175-18. Manufacturer: Bondtech. Model or part number: 600-C-CHT-MOS-175-18.
Manufacturer-recorded specifications
Values below are only fields recorded from the linked manufacturer material. A missing value means the source set did not establish it; it does not imply zero or no limit.
| Specification | Documented value |
|---|---|
| Manufacturer SKU | 600-C-CHT-MOS-175-18 |
| Orifice diameter | 1.8 mm |
| Filament diameter | 1.75 mm |
| Nozzle material | nickel-coated brass |
| Interface family | e3d-v6 |
Model-specific notes
- Optimized for 1.75 mm filament; manufacturer also states 2.85 mm compatibility. This is not a stock-printer or arbitrary-hotend fit.
Physical fit before material choice
Matching orifice size does not establish thread, sealing surface, heater assembly, length, or sensor fit. The exact installed hotend and any adapter must match the scoped rule below.
Documented relationships
Showing 4 of 4 linked rules. The checker can inspect an exact pair and source. A verified rule may still require its listed conditions.
| Related item | Source status | Fit axis | Conditions and exclusions |
|---|---|---|---|
| E3D V6 | VERIFIED | nozzle to hotend | Check source scope before installing. |
| Slice Mosquito | VERIFIED | nozzle to hotend | Check source scope before installing. |
| Slice Copperhead | VERIFIED | nozzle to hotend | Check source scope before installing. |
| Prusa Nextruder | CONDITIONAL | adapter path | Install the official Nextruder V6 adapter and follow its installation instructions; direct fit is not supported.; Excludes: INDX conversions and other unlisted aftermarket hotend changes are outside this stock-configuration fit unless expressly specified.; Requires: Nextruder V6 Nozzle Adapter |
Manufacturer sources
Links document the stated identity, specifications, or scoped relations. They do not represent hands-on testing by this site.
- Bondtech — Bondtech CHT ® Coated Brass Nozzle for RepRap 1.75/2.85 heat blocks checked 2026-10-30; global
Search purchase options
This opens Amazon search results, not a verified product listing. Match the exact part number, diameter, installed hardware, and manufacturer instructions before ordering.
(paid link)
Search 3D Printer Nozzles on Amazon