Raise3D Pro3 HS is listed in the Raise3D 3D printer catalog. This page separates documented specifications from scoped compatibility rules, so an unlisted combination stays unverified.
As an Amazon Associate I earn from qualifying purchases.
Before you rely on a result
A documented product or fit statement is only as specific as its source. Match the exact model, installed hotend, revision, and required adapter before acting.
Exact identification
Catalog ID: raise3d-pro3-hs. Manufacturer: Raise3D. Model or part number: Pro3 HS.
Manufacturer-recorded specifications
Values below are only fields recorded from the linked manufacturer material. A missing value means the source set did not establish it; it does not imply zero or no limit.
| Specification | Documented value |
|---|---|
| Model code | Pro3 HS |
| Build volume | x: 300, y: 300, z: 300 mm |
Model-specific notes
- Volume is the manufacturer quoted mode; independent or dual-extruder modes can have a smaller usable region.
Revision and installed hotend
No separate revision is recorded here. Check the label on your machine and the currently installed hotend before ordering.
Documented relationships
Showing 16 of 16 linked rules. The checker can inspect an exact pair and source. A verified rule may still require its listed conditions.
| Related item | Source status | Fit axis | Conditions and exclusions |
|---|---|---|---|
| Hardened Nozzle V3 (Pro3 HS Series, Pro3 Series, Pro2 Series, E2 and E3 Only) - 0.2mm | VERIFIED | nozzle to printer | Check source scope before installing. |
| Hardened Nozzle V3 (Pro3 HS Series, Pro3 Series, Pro2 Series, E2 and E3 Only) - 0.4mm | VERIFIED | nozzle to printer | Check source scope before installing. |
| Hardened Nozzle V3 (Pro3 HS Series, Pro3 Series, Pro2 Series, E2 and E3 Only) - 0.6mm | VERIFIED | nozzle to printer | Check source scope before installing. |
| Hardened Nozzle V3 (Pro3 HS Series, Pro3 Series, Pro2 Series, E2 and E3 Only) - 0.8mm | VERIFIED | nozzle to printer | Check source scope before installing. |
| Hardened Nozzle V3 (Pro3 HS Series, Pro3 Series, Pro2 Series, E2 and E3 Only) - 1.0mm | VERIFIED | nozzle to printer | Check source scope before installing. |
| Steel Nozzle with WS2 Coating (Pro3 HS Series, Pro3 Series, Pro2 Series, E2 and E3 Only) - 0.4mm | VERIFIED | nozzle to printer | Check source scope before installing. |
| Steel Nozzle with WS2 Coating (Pro3 HS Series, Pro3 Series, Pro2 Series, E2 and E3 Only) - 0.6mm | VERIFIED | nozzle to printer | Check source scope before installing. |
| Steel Nozzle with WS2 Coating (Pro3 HS Series, Pro3 Series, Pro2 Series, E2 and E3 Only) - 0.8mm | VERIFIED | nozzle to printer | Check source scope before installing. |
| Brass Nozzle V3 0.4mm (Pro3 HS Series, Pro3 Series, Pro2 Series, E2 and E3 Only) | VERIFIED | nozzle to printer | Check source scope before installing. |
| Silicon Carbide Nozzle 0.4mm (Pro3 HS Series and E2CF Only) | VERIFIED | nozzle to printer | Check source scope before installing. |
| Silicon Carbide Nozzle 0.6mm (Pro3 HS Series, E2CF and E3 Only) | VERIFIED | nozzle to printer | Check source scope before installing. |
| Raise3D Hyper Speed Hot End Assembly with Silicon Carbide Nozzle 0.4mm V3 (Pro3 and Pro3 HS Series Only) | CONDITIONAL | hotend to printer | Run the required nozzle Z-offset calibration after assembly replacement.; Hyper Speed operating mode requires its specified upgrade system and firmware, not just a hotend swap. |
| Raise3D Hyper Speed Hot End Assembly with V3H Nozzle 0.6mm (Pro3 and Pro3 HS Series Only) | CONDITIONAL | hotend to printer | Run the required nozzle Z-offset calibration after assembly replacement.; Hyper Speed operating mode requires its specified upgrade system and firmware, not just a hotend swap. |
| Raise3D Hyper Speed Hot End Assembly with Silicon Carbide Nozzle 0.6mm V3 (Pro3 and Pro3 HS Series Only) | CONDITIONAL | hotend to printer | Run the required nozzle Z-offset calibration after assembly replacement.; Hyper Speed operating mode requires its specified upgrade system and firmware, not just a hotend swap. |
| Raise3D Hyper Speed Hot End Assembly with Brass Nozzle 0.4mm (Pro3 and Pro3 HS Series Only) | CONDITIONAL | hotend to printer | Run the required nozzle Z-offset calibration after assembly replacement.; Hyper Speed operating mode requires its specified upgrade system and firmware, not just a hotend swap. |
| BuildTak Build Surface (Pro3 and HS Series) | VERIFIED | part to printer | Check source scope before installing. |
Manufacturer sources
Links document the stated identity, specifications, or scoped relations. They do not represent hands-on testing by this site.
- raise3d — Raise3D Pro3 HS High-Speed Professional 3D Printer checked 2026-10-30; US
- raise3d — Hardened Nozzle V3 for Pro3 HS, Pro3, Pro2, E2 & E3 | Raise3D checked 2026-10-30; US
- raise3d — Steel Nozzle with WS2 Coating | Raise3D checked 2026-10-30; US
- raise3d — Brass Nozzle V3 0.4mm for Pro3 HS, Pro3, Pro2, E2 & E3 | Raise3D checked 2026-10-30; US
- raise3d — Silicon Carbide Nozzle 0.4mm for Pro3 HS Series & E2CF | Raise3D checked 2026-10-30; US
- raise3d — Silicon Carbide Nozzle 0.6mm | Raise3D checked 2026-10-30; US
- raise3d — Pro3 HS Silicon Carbide Hot End 0.4 mm V3 | Raise3D checked 2026-10-30; US
- raise3d — Raise3D Hyper Speed Hot End Assembly with V3H Nozzle 0.6mm | Raise3D checked 2026-10-30; US
Search purchase options
This opens Amazon search results, not a verified product listing. Match the exact part number, diameter, installed hardware, and manufacturer instructions before ordering.
(paid link)
Search Replacement Parts on Amazon