Raise3D E3 is listed in the Raise3D 3D printer catalog. This page separates documented specifications from scoped compatibility rules, so an unlisted combination stays unverified.
As an Amazon Associate I earn from qualifying purchases.
Before you rely on a result
A documented product or fit statement is only as specific as its source. Match the exact model, installed hotend, revision, and required adapter before acting.
Exact identification
Catalog ID: raise3d-e3. Manufacturer: Raise3D. Model or part number: E3.
Manufacturer-recorded specifications
Values below are only fields recorded from the linked manufacturer material. A missing value means the source set did not establish it; it does not imply zero or no limit.
| Specification | Documented value |
|---|---|
| Model code | E3 |
| Build volume | x: 330, y: 240, z: 240 mm |
Model-specific notes
- Volume is the manufacturer quoted mode; independent or dual-extruder modes can have a smaller usable region.
Revision and installed hotend
No separate revision is recorded here. Check the label on your machine and the currently installed hotend before ordering.
Documented relationships
Showing 14 of 14 linked rules. The checker can inspect an exact pair and source. A verified rule may still require its listed conditions.
| Related item | Source status | Fit axis | Conditions and exclusions |
|---|---|---|---|
| Hardened Nozzle V3 (Pro3 HS Series, Pro3 Series, Pro2 Series, E2 and E3 Only) - 0.2mm | VERIFIED | nozzle to printer | Check source scope before installing. |
| Hardened Nozzle V3 (Pro3 HS Series, Pro3 Series, Pro2 Series, E2 and E3 Only) - 0.4mm | VERIFIED | nozzle to printer | Check source scope before installing. |
| Hardened Nozzle V3 (Pro3 HS Series, Pro3 Series, Pro2 Series, E2 and E3 Only) - 0.6mm | VERIFIED | nozzle to printer | Check source scope before installing. |
| Hardened Nozzle V3 (Pro3 HS Series, Pro3 Series, Pro2 Series, E2 and E3 Only) - 0.8mm | VERIFIED | nozzle to printer | Check source scope before installing. |
| Hardened Nozzle V3 (Pro3 HS Series, Pro3 Series, Pro2 Series, E2 and E3 Only) - 1.0mm | VERIFIED | nozzle to printer | Check source scope before installing. |
| Steel Nozzle with WS2 Coating (Pro3 HS Series, Pro3 Series, Pro2 Series, E2 and E3 Only) - 0.4mm | VERIFIED | nozzle to printer | Check source scope before installing. |
| Steel Nozzle with WS2 Coating (Pro3 HS Series, Pro3 Series, Pro2 Series, E2 and E3 Only) - 0.6mm | VERIFIED | nozzle to printer | Check source scope before installing. |
| Steel Nozzle with WS2 Coating (Pro3 HS Series, Pro3 Series, Pro2 Series, E2 and E3 Only) - 0.8mm | VERIFIED | nozzle to printer | Check source scope before installing. |
| Brass Nozzle V3 0.4mm (Pro3 HS Series, Pro3 Series, Pro2 Series, E2 and E3 Only) | VERIFIED | nozzle to printer | Check source scope before installing. |
| Silicon Carbide Nozzle 0.6mm (Pro3 HS Series, E2CF and E3 Only) | VERIFIED | nozzle to printer | Check source scope before installing. |
| Left Hot End Assembly (E2 and E3 Only) | CONDITIONAL | hotend to printer | Match the left printhead. |
| Right Hot End Assembly (E2 and E3 Only) | CONDITIONAL | hotend to printer | Match the right printhead. |
| Left Hot End Assembly (E2CF and E3 Only) | CONDITIONAL | hotend to printer | Match the left printhead.; For E3, use the matching composite printhead configuration. |
| Right Hot End Assembly (E2CF and E3 Only) | CONDITIONAL | hotend to printer | Match the right printhead.; For E3, use the matching composite printhead configuration. |
Manufacturer sources
Links document the stated identity, specifications, or scoped relations. They do not represent hands-on testing by this site.
- raise3d — Raise3D E3 IDEX 3D Printer for TPU & Composites checked 2026-10-30; US
- raise3d — Hardened Nozzle V3 for Pro3 HS, Pro3, Pro2, E2 & E3 | Raise3D checked 2026-10-30; US
- raise3d — Steel Nozzle with WS2 Coating | Raise3D checked 2026-10-30; US
- raise3d — Brass Nozzle V3 0.4mm for Pro3 HS, Pro3, Pro2, E2 & E3 | Raise3D checked 2026-10-30; US
- raise3d — Silicon Carbide Nozzle 0.6mm | Raise3D checked 2026-10-30; US
- raise3d — Left Hot End Assembly for E2 & E3 | Raise3D checked 2026-10-30; US
- raise3d — Right Hot End Assembly for E2 & E3 | Raise3D checked 2026-10-30; US
- raise3d — Left Hot End Assembly for E2CF & E3 | Raise3D checked 2026-10-30; US
Search purchase options
This opens Amazon search results, not a verified product listing. Match the exact part number, diameter, installed hardware, and manufacturer instructions before ordering.
(paid link)
Search Replacement Parts on Amazon