QIDI Plus4 is listed in the QIDI 3D printer catalog. This page separates documented specifications from scoped compatibility rules, so an unlisted combination stays unverified.
As an Amazon Associate I earn from qualifying purchases.
Before you rely on a result
A documented product or fit statement is only as specific as its source. Match the exact model, installed hotend, revision, and required adapter before acting.
Exact identification
Catalog ID: qidi-plus4. Manufacturer: QIDI. Model or part number: Plus4.
Manufacturer-recorded specifications
Values below are only fields recorded from the linked manufacturer material. A missing value means the source set did not establish it; it does not imply zero or no limit.
| Specification | Documented value |
|---|---|
| Model code | Plus4 |
| Chamber temperature | 65 °C |
| Enclosure | actively_heated |
| Build volume | x: 305, y: 305, z: 280 mm |
Revision and installed hotend
No separate revision is recorded here. Check the label on your machine and the currently installed hotend before ordering.
Documented relationships
Showing 14 of 14 linked rules. The checker can inspect an exact pair and source. A verified rule may still require its listed conditions.
| Related item | Source status | Fit axis | Conditions and exclusions |
|---|---|---|---|
| Conch Hotend® High-Flow Hotend for QIDI Plus4 — 0.2mm | CONDITIONAL | hotend to printer | Choose the matching heater/sensor and exact model-specific assembly; the catalog may offer these electrical components separately.; Use the exact electrical assembly/variant for this printer and follow the manufacturer installation and calibration instructions. |
| Conch Hotend® High-Flow Hotend for QIDI Plus4 — 0.4mm | CONDITIONAL | hotend to printer | Choose the matching heater/sensor and exact model-specific assembly; the catalog may offer these electrical components separately.; Use the exact electrical assembly/variant for this printer and follow the manufacturer installation and calibration instructions. |
| Conch Hotend® High-Flow Hotend for QIDI Plus4 — 0.6mm | CONDITIONAL | hotend to printer | Choose the matching heater/sensor and exact model-specific assembly; the catalog may offer these electrical components separately.; Use the exact electrical assembly/variant for this printer and follow the manufacturer installation and calibration instructions. |
| Conch Hotend® High-Flow Hotend for QIDI Plus4 — 0.8mm | CONDITIONAL | hotend to printer | Choose the matching heater/sensor and exact model-specific assembly; the catalog may offer these electrical components separately.; Use the exact electrical assembly/variant for this printer and follow the manufacturer installation and calibration instructions. |
| QIDI Plus4 bimetal nozzle 0.2 mm | VERIFIED | nozzle to printer | Check source scope before installing. |
| QIDI Plus4 bimetal nozzle 0.4 mm | VERIFIED | nozzle to printer | Check source scope before installing. |
| QIDI Plus4 bimetal nozzle 0.6 mm | VERIFIED | nozzle to printer | Check source scope before installing. |
| QIDI Plus4 bimetal nozzle 0.8 mm | VERIFIED | nozzle to printer | Check source scope before installing. |
| QIDI Plus5 / Q2 / Q2C tungsten carbide bimetal nozzle 0.4 mm | INCOMPATIBLE | nozzle to printer | Check source scope before installing. |
| QIDI Plus5 / Q2 / Q2C tungsten carbide bimetal nozzle 0.6 mm | INCOMPATIBLE | nozzle to printer | Check source scope before installing. |
| QIDI Plus5 / Q2 / Q2C tungsten carbide bimetal nozzle 0.8 mm | INCOMPATIBLE | nozzle to printer | Check source scope before installing. |
| QIDI Plus4 Bimetal Hot End | VERIFIED | hotend to printer | Check source scope before installing. |
| QIDI BOX Upgrade Accessory Kit PLUS4 | VERIFIED | part to printer | Check source scope before installing. |
| QIDI Box | CONDITIONAL | feeder to printer | Use the BOX hub, signal cable and upgrade kit dedicated to this exact printer model.; Verify printer/BOX firmware and the selected regional electrical version.; Requires: QIDI BOX Upgrade Accessory Kit PLUS4 |
Manufacturer sources
Links document the stated identity, specifications, or scoped relations. They do not represent hands-on testing by this site.
- qidi — Plus4 3D Printer | 305×305×280mm, Auto Calibration checked 2026-10-30; global
- Phaetus — Conch Hotend® High-Flow Hotend for QIDI Plus4 checked 2026-10-30; global
- qidi — Bimetal Nozzles 2pc | Clog-Resistant Single-Filament checked 2026-10-30; global
- qidi — Q2 Tungsten Carbide Bimetal Nozzle | Wear-Resistant 0.4–0.8mm checked 2026-10-30; global
- qidi — Plus4 Bimetal Nozzle Hotend | High-Temp Precision Printing checked 2026-10-30; global
- qidi — QIDI BOX Multi-Color Accessory Kit | Auto Filament Switching checked 2026-10-30; global
- qidi — 16-Color Filament Dry Box | 65°C Drying & NFC checked 2026-10-30; global
Search purchase options
This opens Amazon search results, not a verified product listing. Match the exact part number, diameter, installed hardware, and manufacturer instructions before ordering.
(paid link)
Search Replacement Parts on Amazon