Creality K1 is listed in the Creality 3D printer catalog. This page separates documented specifications from scoped compatibility rules, so an unlisted combination stays unverified.
As an Amazon Associate I earn from qualifying purchases.
Advertisement
Before you rely on a result
A documented product or fit statement is only as specific as its source. Match the exact model, installed hotend, revision, and required adapter before acting.
Exact identification
Catalog ID: creality-k1. Manufacturer: Creality. Model or part number: K1.
Manufacturer-recorded specifications
Values below are only fields recorded from the linked manufacturer material. A missing value means the source set did not establish it; it does not imply zero or no limit.
| Specification | Documented value |
|---|---|
| Model code | K1 |
| Maximum nozzle temperature | 300 °C |
| Maximum bed temperature | 100 °C |
| Build volume | x: 220, y: 220, z: 250 mm |
Model-specific notes
- Exact stock hotend revision must be inspected; compatible family is not inferred from model name alone.
Advertisement
Revision and installed hotend
This model has documented configurations. Check the physical hotend and cable arrangement before relying on a part match.
- original hotend: ['Separate nozzle/hotend; heat-sink set screws visible.']
- integrated hotend: ['Integrated nozzle/hotend; no corresponding heat-sink set screws.']
Documented relationships
Showing 17 of 17 linked rules. The checker can inspect an exact pair and source. A verified rule may still require its listed conditions.
| Related item | Source status | Fit axis | Conditions and exclusions |
|---|---|---|---|
| Creality K1/V3 Unicorn 0.4 mm | CONDITIONAL | hotend to printer | Printer must have the integrated nozzle hotend revision.; Excludes: Original separate hotend is excluded.; Revision: integrated hotend |
| Creality K1/V3 Unicorn 0.6 mm | CONDITIONAL | hotend to printer | Printer must have the integrated nozzle hotend revision.; Excludes: Original separate hotend is excluded.; Revision: integrated hotend |
| Creality K1/V3 Unicorn 0.8 mm | CONDITIONAL | hotend to printer | Printer must have the integrated nozzle hotend revision.; Excludes: Original separate hotend is excluded.; Revision: integrated hotend |
| Creality K1 legacy high-flow nozzle kit | CONDITIONAL | nozzle to printer | Only the original separate hotend revision, not the integrated Unicorn revision.; Revision: original hotend |
| Creality CFS-C | CONDITIONAL | feeder to printer | Install the CFS-C external cutter/buffer and required firmware. This is the CFS-C path, not the original CFS toolhead-upgrade path. |
| Creality CFS | CONDITIONAL | feeder to printer | Install the K1 Series CFS upgrade accessory kit, compatible integrated hotend, updated firmware and configured nozzle coordinates.; Excludes: K1/K1 Max original separate hotend does not support this upgrade kit.; Revision: integrated hotend; Requires: Creality K1 Series CFS Upgrade Accessory Kit |
| Creality K1 Series CFS Upgrade Accessory Kit | CONDITIONAL | part to printer | Integrated-hotend revision and kit-specific firmware required. |
| DiamondBack Nozzles For Creality K1 — 0.25mm | CONDITIONAL | nozzle to printer | Confirm installed OEM hotend generation; legacy K1 screw-in nozzles and integrated Unicorn nozzles are different systems.; Use the exact stock interface/revision named by the manufacturer; a modified hotend may require a different nozzle.; Select and calibrate the matching nozzle diameter in the slicer.; Required OEM configuration: creality-k1-original-hotend. Resolve the installed hotend before a positive verdict.; Revision: original hotend |
| DiamondBack Nozzles For Creality K1 — 0.4mm | CONDITIONAL | nozzle to printer | Confirm installed OEM hotend generation; legacy K1 screw-in nozzles and integrated Unicorn nozzles are different systems.; Use the exact stock interface/revision named by the manufacturer; a modified hotend may require a different nozzle.; Select and calibrate the matching nozzle diameter in the slicer.; Required OEM configuration: creality-k1-original-hotend. Resolve the installed hotend before a positive verdict.; Revision: original hotend |
| DiamondBack Nozzles For Creality K1 — 0.6mm | CONDITIONAL | nozzle to printer | Confirm installed OEM hotend generation; legacy K1 screw-in nozzles and integrated Unicorn nozzles are different systems.; Use the exact stock interface/revision named by the manufacturer; a modified hotend may require a different nozzle.; Select and calibrate the matching nozzle diameter in the slicer.; Required OEM configuration: creality-k1-original-hotend. Resolve the installed hotend before a positive verdict.; Revision: original hotend |
| DiamondBack Nozzles For Creality K1 — 0.8mm | CONDITIONAL | nozzle to printer | Confirm installed OEM hotend generation; legacy K1 screw-in nozzles and integrated Unicorn nozzles are different systems.; Use the exact stock interface/revision named by the manufacturer; a modified hotend may require a different nozzle.; Select and calibrate the matching nozzle diameter in the slicer.; Required OEM configuration: creality-k1-original-hotend. Resolve the installed hotend before a positive verdict.; Revision: original hotend |
| DiamondBack Nozzles For Creality K1 — 1mm | CONDITIONAL | nozzle to printer | Confirm installed OEM hotend generation; legacy K1 screw-in nozzles and integrated Unicorn nozzles are different systems.; Use the exact stock interface/revision named by the manufacturer; a modified hotend may require a different nozzle.; Select and calibrate the matching nozzle diameter in the slicer.; Required OEM configuration: creality-k1-original-hotend. Resolve the installed hotend before a positive verdict.; Revision: original hotend |
| Brass Plated Nozzle for Creality K1, K1 Max, Ender 3 V3 KE, CR-10 SE, CR-M4 — .4mm | CONDITIONAL | nozzle to printer | Confirm the original stock hotend and toolhead/cable revision; this rule does not cover a FlowTech or other aftermarket conversion.; Use the exact stock interface/revision named by the manufacturer; a modified hotend may require a different nozzle.; Select and calibrate the matching nozzle diameter in the slicer.; Required OEM configuration: creality-k1-original-hotend. Resolve the installed hotend before a positive verdict.; Revision: original hotend |
| Brass Plated Nozzle for Creality K1, K1 Max, Ender 3 V3 KE, CR-10 SE, CR-M4 — .6mm | CONDITIONAL | nozzle to printer | Confirm the original stock hotend and toolhead/cable revision; this rule does not cover a FlowTech or other aftermarket conversion.; Use the exact stock interface/revision named by the manufacturer; a modified hotend may require a different nozzle.; Select and calibrate the matching nozzle diameter in the slicer.; Required OEM configuration: creality-k1-original-hotend. Resolve the installed hotend before a positive verdict.; Revision: original hotend |
| Brass Plated Nozzle for Creality K1, K1 Max, Ender 3 V3 KE, CR-10 SE, CR-M4 — .8mm | CONDITIONAL | nozzle to printer | Confirm the original stock hotend and toolhead/cable revision; this rule does not cover a FlowTech or other aftermarket conversion.; Use the exact stock interface/revision named by the manufacturer; a modified hotend may require a different nozzle.; Select and calibrate the matching nozzle diameter in the slicer.; Required OEM configuration: creality-k1-original-hotend. Resolve the installed hotend before a positive verdict.; Revision: original hotend |
| Brass Plated Nozzle for Creality K1, K1 Max, Ender 3 V3 KE, CR-10 SE, CR-M4 — 1.0mm | CONDITIONAL | nozzle to printer | Confirm the original stock hotend and toolhead/cable revision; this rule does not cover a FlowTech or other aftermarket conversion.; Use the exact stock interface/revision named by the manufacturer; a modified hotend may require a different nozzle.; Select and calibrate the matching nozzle diameter in the slicer.; Required OEM configuration: creality-k1-original-hotend. Resolve the installed hotend before a positive verdict.; Revision: original hotend |
| FlowTech™ Hotend for Creality K1 / K1 Max / K1C / K1 SE | CONDITIONAL | hotend to printer | Select the supplied old/new K1 mounting hardware and the correct breakout-board adapter cables for the installed revision.; Use the exact electrical assembly/variant for this printer and follow the manufacturer installation and calibration instructions. |
Advertisement
Manufacturer sources
Links document the stated identity, specifications, or scoped relations. They do not represent hands-on testing by this site.
- Creality — Creality K1 product page checked 2026-10-30; global
- Creality — Creality K1 official user manual: visually read specification table checked 2026-10-30; global
- Creality — Creality Unicorn nozzle kit for integrated K1/K1 Max, K1C, K1 SE, Ender-3 V3 and V3 Plus checked 2026-10-30; US
- Creality — Creality High Flow Nozzle Kit for K1/K1 Max/Ender-3 V3 KE/CR-10 SE checked 2026-10-30; US
- Creality — How to distinguish integrated versus separate K1/K1 Max hotend for CFS upgrade checked 2026-10-30; global
- Creality — Creality CFS-C specifications and named compatible printers checked 2026-10-30; global
- Creality — K1 Series CFS Upgrade Accessory Kit User Manual checked 2026-10-30; global
- E3D — DiamondBack Nozzles For Creality K1 checked 2026-10-30; global
Search purchase options
This opens Amazon search results, not a verified product listing. Match the exact part number, diameter, installed hardware, and manufacturer instructions before ordering.
(paid link)
Search Replacement Parts on AmazonAdvertisement