Bambu Lab X1 Carbon is listed in the Bambu Lab 3D printer catalog. This page separates documented specifications from scoped compatibility rules, so an unlisted combination stays unverified.
As an Amazon Associate I earn from qualifying purchases.
Advertisement
Before you rely on a result
A documented product or fit statement is only as specific as its source. Match the exact model, installed hotend, revision, and required adapter before acting.
Exact identification
Catalog ID: bambu-x1-carbon. Manufacturer: Bambu Lab. Model or part number: X1 Carbon.
Manufacturer-recorded specifications
Values below are only fields recorded from the linked manufacturer material. A missing value means the source set did not establish it; it does not imply zero or no limit.
| Specification | Documented value |
|---|---|
| Model code | X1 Carbon |
| Filament diameter | 1.75 mm |
| Maximum nozzle temperature | 300 °C |
| Maximum bed temperature | 120 °C |
| Enclosure | enclosed |
| Build volume | x: 256, y: 256, z: 256 mm |
| Default nozzle diameter | 0.4 mm |
Model-specific notes
- US 110 V supply heatbed rating is 120°C; the same source lists 110°C at 220 V. Rated geometry includes cutter/height restrictions; default slicer Z is 250 mm unless the documented procedure is followed.
- Retained for the installed base; official manufacturing/active-sales EOL was March 31, 2026.
Advertisement
Revision and installed hotend
No separate revision is recorded here. Check the label on your machine and the currently installed hotend before ordering.
Cataloged hotend family: Bambu X1/P1 integrated nozzle and hotend. This does not identify an aftermarket modification.
Documented relationships
Showing 28 of 40 linked rules. The checker can inspect an exact pair and source. A verified rule may still require its listed conditions.
| Related item | Source status | Fit axis | Conditions and exclusions |
|---|---|---|---|
| Bambu complete hotend 0.2 mm stainless steel | VERIFIED | hotend to printer | Use the specified printer-series electrical parts when this is a bare hotend; follow the manufacturer replacement procedure. |
| Bambu integrated hotend 0.2 mm stainless steel | VERIFIED | hotend to printer | Use the specified printer-series electrical parts when this is a bare hotend; follow the manufacturer replacement procedure. |
| Bambu complete hotend 0.4 mm hardened steel | VERIFIED | hotend to printer | Use the specified printer-series electrical parts when this is a bare hotend; follow the manufacturer replacement procedure. |
| Bambu integrated hotend 0.4 mm hardened steel | VERIFIED | hotend to printer | Use the specified printer-series electrical parts when this is a bare hotend; follow the manufacturer replacement procedure. |
| Bambu complete hotend 0.6 mm hardened steel | VERIFIED | hotend to printer | Use the specified printer-series electrical parts when this is a bare hotend; follow the manufacturer replacement procedure. |
| Bambu integrated hotend 0.6 mm hardened steel | VERIFIED | hotend to printer | Use the specified printer-series electrical parts when this is a bare hotend; follow the manufacturer replacement procedure. |
| Bambu complete hotend 0.8 mm hardened steel | VERIFIED | hotend to printer | Use the specified printer-series electrical parts when this is a bare hotend; follow the manufacturer replacement procedure. |
| Bambu integrated hotend 0.8 mm hardened steel | VERIFIED | hotend to printer | Use the specified printer-series electrical parts when this is a bare hotend; follow the manufacturer replacement procedure. |
| Bambu high-flow integrated hotend 0.4 mm hardened steel | INCOMPATIBLE | hotend to printer | Excludes: Official high-flow page lists X1/P1 Series as unsupported. |
| Bambu Lab AMS | VERIFIED | feeder to printer | Use the manufacturer-specified cables/buffer; multiple AMS units require the appropriate hub. |
| Bambu PPA-CF | CONDITIONAL | filament to printer | Enclosed printer and hardened steel nozzle; use a profile within the specific printer temperature limit. P1S additionally needs appropriate wear-resistant extruder gearing. |
| Bambu Hardened Steel Extruder Gear Assembly | VERIFIED | part to printer | Check source scope before installing. |
| Bambu Hardened Steel Extruder Unit - X1C | VERIFIED | part to printer | Check source scope before installing. |
| Bambu Cooling Fan for Hotend - X1C | VERIFIED | part to printer | Check source scope before installing. |
| Bambu Extruder Filament Sensor - X1 Series | VERIFIED | part to printer | Check source scope before installing. |
| Bambu Extruder Interface Board V9 - X1 Series | VERIFIED | part to printer | Check source scope before installing. |
| Bambu Bambu Lab AMS Hub | VERIFIED | part to printer | Check source scope before installing. |
| High Flow ObXidian® HotEnd With Nozzle for Bambu Lab X1 & P1 — 0.40 mm | CONDITIONAL | hotend to printer | Bare metal assembly only: reuse the correct printer-specific heater pads and temperature sensor; this is not a complete electrical hotend.; Use the exact electrical assembly/variant for this printer and follow the manufacturer installation and calibration instructions. |
| High Flow ObXidian® HotEnd With Nozzle for Bambu Lab X1 & P1 — 0.60 mm | CONDITIONAL | hotend to printer | Bare metal assembly only: reuse the correct printer-specific heater pads and temperature sensor; this is not a complete electrical hotend.; Use the exact electrical assembly/variant for this printer and follow the manufacturer installation and calibration instructions. |
| High Flow ObXidian® Complete HotEnd for Bambu Lab X1 & P1 — X1-Carbon / 0.40 mm | CONDITIONAL | hotend to printer | Use the exact electrical assembly/variant for this printer and follow the manufacturer installation and calibration instructions. |
| High Flow ObXidian® Complete HotEnd for Bambu Lab X1 & P1 — X1-Carbon / 0.60 mm | CONDITIONAL | hotend to printer | Use the exact electrical assembly/variant for this printer and follow the manufacturer installation and calibration instructions. |
| High Flow ObXiDian® 500 Complete HotEnd for Bambu Lab X1 & P1 — X1C / 0.40mm | CONDITIONAL | hotend to printer | Use the exact electrical assembly/variant for this printer and follow the manufacturer installation and calibration instructions. |
| High Flow ObXiDian® 500 Complete HotEnd for Bambu Lab X1 & P1 — X1C / 0.60mm | CONDITIONAL | hotend to printer | Use the exact electrical assembly/variant for this printer and follow the manufacturer installation and calibration instructions. |
| DiamondBack HotEnd for Bambu Lab X1C, X1E, P1P & P1S — X1-Carbon / 0.40mm | CONDITIONAL | hotend to printer | Use the exact electrical assembly/variant for this printer and follow the manufacturer installation and calibration instructions. |
| DiamondBack HotEnd for Bambu Lab X1C, X1E, P1P & P1S — X1-Carbon / 0.60mm | CONDITIONAL | hotend to printer | Use the exact electrical assembly/variant for this printer and follow the manufacturer installation and calibration instructions. |
| DiamondBack HotEnd for Bambu Lab X1C, X1E, P1P & P1S — X1-Carbon / 0.80mm | CONDITIONAL | hotend to printer | Use the exact electrical assembly/variant for this printer and follow the manufacturer installation and calibration instructions. |
| FlowTech™ Hotend for Bambu Lab X1 and P1 Printers — X1/X1C / FlowTech CM2™ - Hardened Tip - Standard Flow | CONDITIONAL | hotend to printer | Use the exact electrical assembly/variant for this printer and follow the manufacturer installation and calibration instructions. |
| FlowTech™ Hotend for Bambu Lab X1 and P1 Printers — X1/X1C / FlowTech Brass Plated CHT - High Flow | CONDITIONAL | hotend to printer | Use the exact electrical assembly/variant for this printer and follow the manufacturer installation and calibration instructions. |
Advertisement
Manufacturer sources
Links document the stated identity, specifications, or scoped relations. They do not represent hands-on testing by this site.
- Bambu Lab — Bambu Lab US public product catalog, page 1 checked 2026-10-30; US
- Bambu Lab — Bambu X1, X1 Carbon and X1E official EOL announcement checked 2026-10-30; global
- Bambu Lab — Bambu Lab EU public product catalog, page 3 checked 2026-10-30; EU
- Bambu Lab — Bambu Lab EU public product catalog, page 1 checked 2026-10-30; EU
- E3D — High Flow ObXidian® HotEnd With Nozzle for Bambu Lab X1 & P1 checked 2026-10-30; global
- E3D — High Flow ObXidian® Complete HotEnd for Bambu Lab X1 & P1 checked 2026-10-30; global
- E3D — High Flow ObXiDian® 500 Complete HotEnd for Bambu Lab X1 & P1 checked 2026-10-30; global
- E3D — DiamondBack HotEnd for Bambu Lab X1C, X1E, P1P & P1S checked 2026-10-30; global
Search purchase options
This opens Amazon search results, not a verified product listing. Match the exact part number, diameter, installed hardware, and manufacturer instructions before ordering.
(paid link)
Search Replacement Parts on AmazonAdvertisement